CSX SD40-2 "Skin":
November 21, 2001
Repaint by John D. Peterson (http://www.alabamarailfan.com)
Model by Jason Dilworth (http://www.mapleleaftracks.com)
Physics by Chris Lee 
Lights by Tim Kent
3rd party contributions: Werger (physics)

This is a repaint of Jason Dilworth's SD40-2 model to match the current CSX units that
wear the grey, blue and yellow paint scheme.

The sounds and cabview are already aliased in the ".eng" file, so there should be no need to
copy any other files over.

The .ace files in the repaint have been compressed using utilities available at http://fly.to/mwgfx


To install:
---------------------------------------------
1) point this self extracting program to your MS Train Simulator root directory
   (usually "\Program Files\Microsoft Games\Train Simulator\")

2) this installation program will copy all the necessary files to the proper
   location from there.

3) the installation will create the needed folders as well as add a "default"
   consist so you can begin running your new engine right away!
   
... and that's  all there is to it!


Copyright and Distribution
---------------------------------------------
This locomotive skin is released as Freeware.  The .ace files included in this archive are 
Copyright 2001 John D. Peterson; if you wish to redistribute them please contact me at 
john@alabamarailfan.com/http://www.alabamarailfan.com

As freeware you are permitted to distribute this
archive subject to the following conditions:

- The archive must be distributed without modification to the
contents of the archive. Redistributing this archive with any files
added, removed or modified is prohibited.

- No charge may be made for this archive other than that to cover the
cost of its distribution. If a fee is charged it must be made clear
to the purchaser that the archive is freeware and that the fee is to
cover the distributor's costs of providing the archive.

- The authors' rights and wishes concerning this archive must be
respected.
